| 유닛 |
| |
모든 Unit은 가로세로 약 4.5m 즉, 약 6평을 커버합니다. |
| |
| |
|
|
| |
| |
| Transformer |
| |
Transformer는 본사에서 공급하는 것을 사용할 수도 있으며
다른 업체에서 사용하는 Transformer를 사용하셔도 무관합니다.
모든 Unit은 16~18V AC 를 사용하므로 그 사양을 따르시면 됩니다.
다음은 (주)몽태랑 인터내셔날에서 제공하는 Transformer의 사양입니다. |
| |
 |
입력전압 : 220V / 60 Hz
출력전압 : 18V / 40va
Power Rating : 40va
Size : 16㎝(가로) x 10㎝(세로) x 8㎝(높이) |
| |
| |
| |
| Specification |
| |
| Model : LM6 |
 |
|
- Height : 15cm
- Width : 15cm
- Weight : 1.4kg
- Electroplated steel housing
- Lightweight Mounting Chain
- Power Rating: 10 watts RMS- Frequency
Response: 50-12,000Hz
- Pressure/Sensitivity: SPL - at 1 watt/m-90dB
- Impedance: 16 Ohms |
|
- Resonance: 82 Hz - Magnet Weight: 10 oz.
- Magnet Structure Weight: 26 oz.
- Cone: Formed Fiber
- Cone Suspension: High Compliance Foam - Voice
Coil: 1-inch diameter
- Voice Coil Form: Anodized Aluminum
- Paging Input: 25v RMS at 12.5mW (50kOhms)
- Power Requirement : 16v/18v AC, 60 Hz at 50mA
(typical - no page)
Up to 200mA(with paging)
- Output Adjustment: 15dB step-volume control
- Additional continuous control: 56-86 dBA total
- Wire Requirement: 18 gauge, plenum rated non
shielded 2, 4 or 6 conductor |
| |
| |
| Model : LS6 |
 |
|
- Height : 15cm
- Width : 15cm
- Weight : 1.4kg
- Electroplated steel housing
- Lightweight Mounting Chain
- Power Rating: 10 watts RMS- Frequency
Response: 50-12,000Hz
- Pressure/Sensitivity: SPL - at 1 watt/m-90dB
- Impedance: 16 Ohms |
|
- Resonance: 82 Hz - Magnet Weight: 10 oz.
- Magnet Structure Weight: 26 oz.
- Cone: Formed Fiber
- Cone Suspension: High Compliance Foam - Voice
Coil: 1-inch diameter
- Voice Coil Form: Anodized Aluminum
- Paging Input: 25v RMS at 12.5mW (50kOhms)
- Power Requirement : 16v/18v AC, 60 Hz at 50mA
(typical - no page)
Up to 200mA(with paging)
- Output Adjustment: 15dB step-volume control
- Additional continuous control: 56-86 dBA total
- Wire Requirement: 18 gauge, plenum rated non
shielded 2, 4 or 6 conductor |
| |
| |
Model :
ECPM6, ECPM4 |
 |
|
- Height : 15cm(ECPM6),
9cm(ECPM4)
- Width : 15cm
- Weight : 1.4kg(ECPM6), 1.2kg(ECPM4)
- Electroplated steel housing
- Lightweight Mounting Chain
- Power Rating: 10 watts RMS
- Frequency Response: 50-12,000 Hz
- Pressure/Sensitivity: SPL - at 1 watt/m-90dB |
|
- Impedance: 16 Ohms
- Resonance: 82 Hz - Magnet Weight: 10 oz. -
Magnet Structure Weight: 26 oz.
- Cone: Formed Fiber - Cone Suspension: High
Compliance Foam
- Voice Coil: 1-inch diameter - Voice Coil Form:
Anodized Aluminum
- Paging Input: 25v RMS at 12.5mW (50kOhms)
- Power Requirement : 16v/18v AC, 60 Hz at 50mA
(typical - no page)
Up to 200mA(with paging)
- Output Adjustment: 15dB step-volume control
- Additional continuous control: 56-86 dBA total
- Wire Requirement: 18 gauge, plenum rated non
shielded 2, 4 or 6 conductor
|
| |
| |
Model :
ECPS6, ECPS4 |
|
|
- Height : 15cm(ECPM6),
9cm(ECPM4)
- Width : 15cm
- Weight : 1.4kg(ECPM6), 1.2kg(ECPM4)
- Electroplated steel housing
- Lightweight Mounting Chain
- Power Rating: 10 watts RMS
- Frequency Response: 50-12,000 Hz
- Pressure/Sensitivity: SPL - at 1 watt/m-90dB |
|
- Impedance: 16 Ohms
- Resonance: 82 Hz - Magnet Weight: 10 oz. -
Magnet Structure Weight: 26 oz.
- Cone: Formed Fiber
- Cone Suspension: High Compliance Foam - Voice
Coil: 1-inch diameter
- Voice Coil Form: Anodized Aluminum
- Paging Input: N/A
- Power Requirement : Powerd by master
- Wire Requirement: 18 gauge, plenum rated non
shielded 2 conductor
|
| |
| |
| Model : LM6-CVC |
 |
|
- Height : 15cm
- Width : 15cm
- Weight : 1.4kg
- Electroplated steel housing
- Lightweight Mounting Chain
- Power Rating: 10 watts RMS
- Frequency Response: 50-12,000 Hz
- Pressure/Sensitivity: SPL - at 1 watt/m-90dB |
|
- Impedance: 16 Ohms
- Resonance: 82 Hz - Magnet Weight: 10 oz. -
Magnet Structure Weight: 26 oz.
- Cone: Formed Fiber - Cone Suspension: High
Compliance Foam
- Voice Coil: 1-inch diameter - Voice Coil Form:
Anodized Aluminum
- Paging Input: 25v RMS at 12.5mW (50kOhms)
- Power Requirement : 16v/18v AC, 60 Hz at 50mA
(typical - no page)
Up to 200mA(with paging)
- Output Adjustment: 15dB step-volume control
- Additional continuous control: 56-86 dBA total
- Wire Requirement: 18 gauge, plenum rated non
shielded 2, 4 or 6 conductor |
| |
| |
|
|
